How Flash Samsung S5280 With Odin

Samsung S5280 Galaxy Star Firmware Update Steps:
- Turn off the device, And take out its battery, SIM and memory cards.

- Run Odin.exe program.

- Check these options: Re-Partition (If you have PIT file only), Auto Reboot, F.Reset Time.

- Click PIT button to select: mintss.pit

- Firmware files selection:

Click Bootloader button to select: BOOTSPL_S5280xxxxxx_..._REV03_user_low_ship.tar.md5
Click PDA button to select: CODE_S5280xxxxxx_..._REV03_user_low_ship.tar.md5
Click Phone button to select: MODEM_S5280xxxxxx_REV03.tar.md5
Click CSC button to select: CSC_Oxx_S5280Oxxxxxx_..._REV03_user_low_ship.tar.md5

- Entering the Download Mode:
Put the battery back into your device, Press and Hold Volume Down key + Home key + Power, After you get the warning message release all keys and press Volume Up key.

- Use the USB cable to connect your device to the computer, Don't use any USB-HUB for connecting, And use only main USB slots.

- Wait until Windows detects the connected device and installs its suitable USB drivers.

- In case everything is OK, Then Odin program will detect your connected device (0:[COMxx]).

- Click on Start button.

- Odin program will start installing the new firmware files into your device, So wait until the device reboots.

- If the update was successfully done, Then you will notice PASS! Word at Odin program.

- Disconnect the USB cable.

- Check your device firmware version *#1234# (You should see the new installed one).

- Turn off the device again, Reinsert the SIM and memory cards and turn it on.

- Now you can customize your device after installing the new firmware version.

- If you made any backup of your device data before the update then you can restore it again.

- Done.