How Flash Samsung E1282T

Firmware Update Steps:

- Turn off the phone.

- Take out any SIM cards or memory card of it.

- Run Z3x Samsung Tool  program.

- For NOR_FDL: nor_fdl.bin

- For NV: nvitem.bin

- For SSboot: SSbootT.bin

- For PS: SC6530_sc6530_samsung_EricPlus_stone.bin

- For CSC: mmi_res_128x160_csc.bin

- For UDISC: preload_img.bin

- For HDISC: preload_sys_img.bin

- Select Re-Write NV.

- Click on Flash button.

- Now put the battery back into your phone.

- Press and Hold OK key on your phone's keypad and connect USB cable to it.

- The program will start the flash process automatically.

- After the program finishes his job, Disconnect USB cable from phone.

- With your phone on enter this code *2767*3855#

- The above code will full reset your Samsung E1282T.

- Now you can use your mobile phone the way you like.

Read More

How Unlock Samsung C3303K

Unlock Phone Steps:

- Run Samsung 2G Tool.
- Model : C3300K
- Click Direct Unlock.
- Phone Must Be Off.

- Connect Cable E210 To Your Phone.
- Click To Power Button.

Read More

How Flash Samsung I5510

Firmware Update Steps:

- Turn off the phone.

- Take out any SIM cards or memory card of it.

- Run Odin.exe program.

- Check the following settings: Re-Partition, Auto Reboot, F.Reset Time.

- Click PIT button and select: Callisto_v1.0.ops.

- Click Boot button and select: S5510xxxxxx_BOOTLOADER_CL872686.tar.md5

- Click PDA button and select: S5510xxxxxx_PDA_CL872686.tar.md5

- Click PHONE button and select: S5510xxxxxx_amss_phone_CL776067.tar.md5

- Click CSC button and select: GT-S5510-CSC-MULTI-Oxxxxx.tar.md5

- Put your Samsung S5282 Galaxt Star Duos device into Download Mode:

Press and Hold Q key + Power key, For Qwerty Phone Or Press and Hold A key + Power key, For Azerty Phone
- Connect the device to your PC using the USB cable.

- Wait for Windows to install the needed USB drivers.

- Look at Odin's window and check if the COM port of your device is detected (0:[COMxxx]).

- Click on Start button.

- Odin will install the new firmware files into your Phone, Just wait for it to be done.

- The device will be rebooted after installing the new firmware.

- Look at Odin's window and if you see PASS! Word then the update was successful.

- Disconnect the USB cable from phone.

- Wait for the device to be fully on and check the new firmware version bu this code *2767*3855#.

- Now you can turn the mobile off, Insert SIM Cards, Memory card, Then turn it on again.

- When the device is on again you are free to customize it and restore your backup (In case you have made one), Then enjoy your perfect work.

Read More

How Unlock Samsung E1205T

Unlock Phone Steps:

- Run Samsung 2G Tool.
- Model : E1200T
- Click Setting Model 
- Chose Flash Mode
- Click Unlock.
- Click Jobs.
- Click Direct Unlock
- Phone Must Be Off.

- Connect Cable E210 To Your Phone.

Read More

How To Flash Samsung D900E

Firmware Update Steps:

- Run Samsung 2G Tool.
- Select Flash Files :
   Bin, Tfs
- Phone Must Be OFF
- Connect Cable D800 To Your Phone.
- Click Frimware.
- Click To Power Button In Your Phone

Read More

How Unlock Samsung S5360

Unlock Phone Steps:

- Run Z3x Samsung Tool.
- Enable "USB debugging" in "Settings"-"Aplications"-"Development" ("Settings"-"Developer     options" for Android 4.0+).
- Click Unlock.
- Phone Must Be ON.

- Connect Cable Usb To Your Phone.

Read More

How Flash Samsung S5230W

Firmware Update Steps:

- Run MultiLoader flasher and check these options: BRCM2133, Full Download.
- Now you have to select the Firmware files that will be used by MultiLoader to Update your phone:

Boot: select the Boot files Folder from the Firmware folder which you want to use.

Apps: apps_compressed.bin

Rsrc1:  Rsrc_S5230_Open_Europe_Common.rc1

Rsrc2:  Rsrc2_S5230(Low).rc2

Factory Fs: FactoryFs_S5230_Open_Europe_Common.ffs
- Put your phone into Download Mode: Press Volume Down Key +Camera + Power..
- Connect USB cable to phone and PC and install drivers ( If needed ).
- Make sure that MultiLoader can detect the Com Port number of your connected phone.
- Click Download button on MultiLoader program to begin the update process.
- Odin flasher will update your phone then will restart it automatically.
- After your phone completely on do full reset by this code: *2767*3855#.
- Wait till the phone rebooted and setup the needed options to use it the way you like.

Read More

How to Unlock Samsung C520

Unlock Phone Steps:

- Run Samsung 2G Tool.
- Click Direct Unlock.
- Phone Must Be ON.

- Connect Cable D800 To Your Phone.

Read More

How To Unlock Samsung S3100

Unlock Phone Steps:

- Run Samsung 2G Tool.
- Click To Settings Model.
- Chose Flash Mode.
- Click Jobs.
- Phone Must Be OFF
- Connect Cable E210 To Your Phone.
- Click Read Info.
- And Enter Code To Your Phone

Read More

How To Unlock Samsung M310

Unlock Phone Steps:

- Run Samsung 2G Tool.
- Click Direct Unlock.
- Phone Must Be ON.

- Connect Cable E210 To Your Phone.

Read More

How To Unlock Samsung J700 & J700V

Unlock Phone Steps:

- Run Samsung 2G Tool.
- Click To Settings Model.
- Chose Flash Mode.
- Click Jobs.
- Click Direct Unlock.
- Connect Cable E210 To Your Phone.
- And Click To Power Button.

Read More

How Flash Samsung S8530 With Odin

Firmware Update Steps:

- Run Odin flasher and check these options: Re-Partition, Auto Reboot, F.Reset Time.
- Now you have to select the Firmware files that will be used by Odin to Update your phone:

PIT: cooperve_0623.pit

BOOTLOADER: DefaultCalDataWithBoot_S5830xxxxx_REV00.tar.md5

PDA: PDA_S5830xxxxx_REV00.tar.md5

PHONE: MODEM_S5830xxxxx_REV00.tar.md5

CSC: GT-S5830-MULTI-CSC-Oxxxxx.tar.md5

- Put your phone into Download Mode: Press Volume Down Key + Volume Up Key + Power.
- Connect USB cable to phone and PC and install drivers ( If needed ).
- Make sure that Odin can detect the Com Port number of your connected phone.
- Click Start button on Odin program to begin the update process.
- Odin flasher will update your phone then will restart it automatically.
- After your phone completely on do full reset by this code: *2767*3855#.
- Wait till the phone rebooted and setup the needed options to use it the way you like.

Read More

How to Flash Samsung S5830I With Odin

Firmware Update Steps:

- Run Odin flasher and check these options: Re-Partition, Auto Reboot, F.Reset Time.
- Now you have to select the Firmware files that will be used by Odin to Update your phone:

PIT: cooperve_0623.pit

BOOTLOADER: DefaultCalDataWithBoot_S5830ixxxxx_REV00.tar.md5

PDA: PDA_S5830ixxxxx_REV00.tar.md5

PHONE: MODEM_S5830ixxxxx_REV00.tar.md5

CSC: GT-S5830i-MULTI-CSC-Oxxxxx.tar.md5

- Put your phone into Download Mode: Press Volume Down Key + Volume Up Key + Power.
- Connect USB cable to phone and PC and install drivers ( If needed ).
- Make sure that Odin can detect the Com Port number of your connected phone.
- Click Start button on Odin program to begin the update process.
- Odin flasher will update your phone then will restart it automatically.
- After your phone completely on do full reset by this code: *2767*3855#.
- Wait till the phone rebooted and setup the needed options to use it the way you like.

Read More

How to Unlock Samsung Star S5282 Duos After Flash

Samsung S5282 Galaxy Star Duos Firmware Update Steps:

- Turn off the phone.

- Take out any SIM cards or memory card of it.

- Run Odin.exe program.

- Check the following settings: Re-Partition, Auto Reboot, F.Reset Time.

- Click PHONE button and select: MODEM_S5282xxxxx_REV03.tar

- Put your Samsung S5282 Galaxt Star Duos device into Download Mode:

Press and Hold Volume Down key + Home key + Power key, When you see the warning message release all keys, And press Volume Up key to enter the phone into Download Mode.

- Connect the device to your PC using the USB cable.

- Wait for Windows to install the needed USB drivers.

- Look at Odin's window and check if the COM port of your device is detected (0:[COMxxx]).

- Click on Start button.

- Odin will install the new firmware files into your Galaxy Star Duos, Just wait for it to be done.

- The device will be rebooted after installing the new firmware.

- Look at Odin's window and if you see PASS! Word then the update was successful.

- Disconnect the USB cable from phone.

- Wait for the device to be fully on and check the new firmware version bu this code *#1234#

- Now you can turn the mobile off, Insert SIM Cards, Memory card, Then turn it on again.

- When the device is on again you are free to customize it and restore your backup (In case you have made one), Then enjoy your perfect work.

Read More

How Flash Samsung S5282 Duos With Odin

Samsung S5282 Galaxy Star Duos Firmware Update Steps:

- Turn off the phone.

- Take out any SIM cards or memory card of it.

- Run Odin.exe program.

- Check the following settings: Re-Partition, Auto Reboot, F.Reset Time.

- Click PIT button and select: mint.pit file.

- Click Bootloader button and select: BOOTSPL_S5282xxxxxx_..._REV03_user_low_ship.tar

- Click PDA button and select: CODE_S5282xxxxxx_1127854_REV03_user_low_ship.tar

- Click PHONE button and select: MODEM_S5282xxxxx_REV03.tar

- Click CSC button and select: CSC_Oxx_S5282Oxxxxxx_1127854_REV03_user_low_ship.tar

- Put your Samsung S5282 Galaxt Star Duos device into Download Mode:

Press and Hold Volume Down key + Home key + Power key, When you see the warning message release all keys, And press Volume Up key to enter the phone into Download Mode.

- Connect the device to your PC using the USB cable.

- Wait for Windows to install the needed USB drivers.

- Look at Odin's window and check if the COM port of your device is detected (0:[COMxxx]).

- Click on Start button.

- Odin will install the new firmware files into your Galaxy Star Duos, Just wait for it to be done.

- The device will be rebooted after installing the new firmware.

- Look at Odin's window and if you see PASS! Word then the update was successful.

- Disconnect the USB cable from phone.

- Wait for the device to be fully on and check the new firmware version bu this code *#1234#

- Now you can turn the mobile off, Insert SIM Cards, Memory card, Then turn it on again.

- When the device is on again you are free to customize it and restore your backup (In case you have made one), Then enjoy your perfect work.

Read More

How Flash Samsung S5280 With Odin

Samsung S5280 Galaxy Star Firmware Update Steps:
- Turn off the device, And take out its battery, SIM and memory cards.

- Run Odin.exe program.

- Check these options: Re-Partition (If you have PIT file only), Auto Reboot, F.Reset Time.

- Click PIT button to select: mintss.pit

- Firmware files selection:

Click Bootloader button to select: BOOTSPL_S5280xxxxxx_..._REV03_user_low_ship.tar.md5
Click PDA button to select: CODE_S5280xxxxxx_..._REV03_user_low_ship.tar.md5
Click Phone button to select: MODEM_S5280xxxxxx_REV03.tar.md5
Click CSC button to select: CSC_Oxx_S5280Oxxxxxx_..._REV03_user_low_ship.tar.md5

- Entering the Download Mode:
Put the battery back into your device, Press and Hold Volume Down key + Home key + Power, After you get the warning message release all keys and press Volume Up key.

- Use the USB cable to connect your device to the computer, Don't use any USB-HUB for connecting, And use only main USB slots.

- Wait until Windows detects the connected device and installs its suitable USB drivers.

- In case everything is OK, Then Odin program will detect your connected device (0:[COMxx]).

- Click on Start button.

- Odin program will start installing the new firmware files into your device, So wait until the device reboots.

- If the update was successfully done, Then you will notice PASS! Word at Odin program.

- Disconnect the USB cable.

- Check your device firmware version *#1234# (You should see the new installed one).

- Turn off the device again, Reinsert the SIM and memory cards and turn it on.

- Now you can customize your device after installing the new firmware version.

- If you made any backup of your device data before the update then you can restore it again.

- Done.

Read More